Call Us? (407) 770-1000|Contact@midfloridacarwash.com

3X Color Foam Retrofit Kit

Give the consumer what they want and increase your sales!  Add 3X Color Foam to your LaserWash 4000 and attract more customers to your wash bay.  At the time of its release, 3X Color Foam was one of the largest revenue-generating options available for car wash operators.

The 3X Color Foam Applicator is designed to apply three colored foamed solutions to the vehicle creating a rainbow effect. It replaces the standard foaming wax pass and is applied after the initial soap and high pressure rinse.

If interested in the 3X Color Foam Retrofit Kit for your SlimLine pump station, please contact us.

SKU: 11350046 Category:

Description

What’s Included

Complete 3X kit
» 19.0b version software upgrade
» Pump manifolds
» Bridge manifolds
» Festoon extension
» All hoses needed for installation

What’s NOT Included

  • Weep or freeze protection (additional kit, KTL4418-KIT, required)

Installation Information

People Required:
3-4
Mechanical skill required:
Advanced: Precise cutting or drilling; Use of a die grinder or torch; Welding
Electrical skill required:
Basic: Low-voltage electrical; Low voltage wire terminations
Fluid skill required:
Advanced: Fluid control interpretation
Equipment Knowledge:
Advanced: Full understanding of machine set-up and operation; Advanced level of troubleshooting skills
Tools Required:
Flathead Screwdriver
7/16″ Socket (3/8″ drive)
Center Punch
9/16″ Deep Well Socket
File
Side Cut Pliers
Tape Measure
Step Ladder (2)
Power Drill
Hammer Drill
Extension Cords
9/32″ Drill Bit
Pencil/Marker
Combination Square
Teflon Tape
7/16″ Open/Box Wrench
Utility Knife
11/16″ Open-end Wrench
Grinder
Reciprocating Power Saw
1/4” and 3/8” Concrete Drill Bits
Pipe Wrench

If you need assistance in installing this item, please contact your local distributor.

Go to Top