The image of your bay means everything to the customer. The look of your bay immediately leaves an impression in your customers’ minds about your wash and the experience they’ll have at your location. Any decrease in your bay’s appearance can greatly impact potential customer visits, resulting in a possible loss in profits. Refresh the look of your bay by updating the signs for your LaserWash G5!
Sign Retrofit Kit – In-Bay
Description
What’s Included
- Sign cover front with updated artwork
- Sign cover back
- Gaskets
What’s NOT Included
- This kit assumes the reuse of your existing LED arrows board, LED chevron boards, keyboard receiver and alarm.
Installation Information
|
People Required:
|
1-2 |
|
Mechanical skill required:
|
Intermediate: General cutting or drilling; Use of a Dremel or angle grinder |
|
Electrical skill required:
|
Basic: Low-voltage electrical; Low voltage wire terminations |
|
Fluid skill required:
|
N/A |
|
Equipment Knowledge:
|
Basic: General machine programming |
|
Tools Required:
|
Pliers 19mm (3/4″) Socket 22mm Drill Bit Phillips Screwdriver 19mm (3/4″) Box Wrench Hole Saw, 1″ Flat Blade Screwdriver Grinder Small Wago Screwdriver Socket Wrench Drill Double Sided Stick Tape 10mm Socket or Box Wrench 13mm Drill Bit Silicone |
If you need assistance in installing this item, please contact your local distributor.
