Taper Lock Bushing – P2X138 – 1-3/8 Bore – Bolt Circle
Diameter 2-7/16in – Bolt Size 5/16 x 1in – Includes Cap Bolts – Length
2-15/16in – Used on Sonny’s Blower Impeller.
Bushing P2X138 Bore 1-3/8in Taper Lock
Description
Blower Taper-Lock for Impeller
- Line up the punch mark on the blower impeller hub with
the keyway on the Taper- Lock bushing to ensure a balanced
impeller - When installing, place cap screws loosely in pull-up
holes. Bushing remains loose to assure sliding fit on
shaft - With key on shaft, slide impeller to desired position on
impeller - Align bushing and tighten screws alternately &
progressively-until they are pulled up tight - Torque in Ft.: 18 lbs.
- Screws included
Warning
Use of anti-seize lubricant on tapered cone surfaces
or on bolt threads when mounting, may result in damage to Taper
Lock, voiding all manufacturer’s warranties.
