-
Hanna Frame - CSLC3-FHB - Hinge Bar and 3-Pin with Log Carrier Link.
-
Hanna Frame - CSCT-FHB - Hinge Bar and 2-Pin with D88K Carrier Link. el Frame.
-
UHMW (Poly) Surface Wheel - Dimension; 3in Diameter x 6in Length x 1in Bore. - Used on Flapan and Sonny's Surface Roller.
-
Hanna Frame - CSB3-FHB - Hinge Bar and 3-Pin with BRH188 Carrier Link.
-
Frame Only for Flapan Two Wheel Surface Roller with D88K Link - Sonny's Replacement for Flapan - Material; Steel
-
UHMW (Poly) Inboard Wheel - Dimension; 3-3/8in Diameter x 3-1/4in Lenght. - Used on AVW and Peco RCV 4 Wheel Roller.
-
Frame Only CRCV6TF-H for Hanna 6 Wheel Roller Tall Profile - Sonny's Replacement for Hanna - Material; Steel
-
UHMW (Poly) Pusher Wheel - Dimension; 2in Diameter x 3-3/8in x 1in Bore. - Used on Hanna 6-Wheel Low and Tall Profile Roller.
-
UHMW (Poly) Offset Wheel - Dimension; 3-3/8in Diameter x 3-1/8in Length x 2in Bore - Used on PDQ 1555 Roller
-
Hanna CSPC Link Head D88K Carrier Link. - Used on 2-Pin 3in Wheel Frame.
-
Wheel Steel Outrigger - RCV Wheel Dimension; 3-1/2in Diameter x 1in Width x 5/8-18 Fine Thread - Used on AVW, Hanna, Peco, PDQ and Slant Rollers
-
Surface Roller Steel Wheel Outer with UHMW Insert - Dimension; 2-3/4in Diameter x 1-1/2in Width x 1-1/4in Bore - Used on Econocraft and Ultimatec Surface Roller.
-
Ultimatec Surface Frame Only with Log Link. - Sonny's Replacement for Ultimatec.
-
Frame Only for Belanger 6 Wheel Roller BSWR-1 - Sonny's Replacement for Belanger - Material; Steel
-
Rear Idler Steel Axle Shaft Pin - 7/8in Diameter x 4-7/8in Length with out center axle bolt hole.
-
Frame Only CRCV6LF-H for Hanna 6 Wheel Roller Low Profile - Sonny's Replacement for Hanna - Material; Steel
-
UHMW (Poly) Pusher Wheel - Dimension; 2-1/2in Diameter x 4in Length x 1in Bore. - Used on Sonny's 4-Wheel Mid Profile Roller
-
Hanna CSD6 Only Link Head with D667 Carrier Link. - Used on 2-Pin 3in Wheel Frame.
-
Roller Axle Shaft 5/8in Diameter x 11-3/4in Length x 5/8-18 Fine Thread. - Used on Slant Rollers.
-
UHMW (Poly) Pusher Wheel - Dimension; 2in Diameter x 5-3/4in x 1in Bore - Used on Hanna 3-Wheel 2in Surface Roller
-
Frame Only for Belanger 6 Wheel Roller BSWR-3 - Sonny's Replacement for Belanger - Material; Steel
-
UHMW (Poly) Inboard Wheel - Dimension; 3-3/8in Diameter x 3-1/16 Length x 2-1/32 Bore. - Used on Econocraft and Hanna RCV 4 Wheel Roller.
-
Hanna Frame - CSBT-FHB - Hinge Bar and 2-Pin with BRH188 Carrier Link.
-
Roller Axle Shaft 3/4in Diameter x 11-1/4in Length x 5/8-18 Fine Thread. Used on PDQ Roller.
-
UHMW (Poly) Wheel Inner Pusher - Dimension; 4in Diameter x 1-1/8in Inside Diameter - ( MacNeil # 44-063-00-PP RG440 ) 2 # needed per assembly
-
UHMW (Poly) Surface Wheel Dimension; 3in Diameter x 6in Length x 1-1/4in Bore - Used on Econocraft Surface Roller.
-
Sonny's Frame Only Tall Profile - Material; Steel
-
Surface Roller Steel Wheel - Dimension; 3in Diameter x 1-5/8in Width - Used on Hanna Surface Roller - (CSB1SW)
-
Hanna Frame - CSLCT-FHB - Hinge Bar and 2-Pin with Log Link.
-
Sonny's - Air Take-up 4 Wheel Roller Frame Only with Log Chain Link. - Material; Steel
-
Hanna Retainer End Plate for ( 2 Wheel Surface Roller ) x 2in Diameter Wheel. - Used on Hanna Surface Roller. Sonny's Replacement for Hanna.
-
UHMW (Poly) Wheel Insert - Dimension; 2in Diameter x 2.73 Length - Used on Hanna Surface Roller (CSB1SW)
-
Sonny's Frame Only 2 Wheel Surface Roller - Material; Steel
-
Frame Only CRCV41-H for Hanna RCV Tube Bar - Sonny's Replacement for Hanna - Material; Steel