So, you already have low arch impacts with your ORIGINAL Virtual Treadle, but what if you never had to restart your machine after a trailer hitch impact? Laserminder automatically adjusts the arch position to maneuver around aftermarket products, such as trailer hitches or bike racks. Included hardware will also secure the arch in an impacted position in the event of shear-pin breakage.
LaserMinder for the LW4000
Description
Before Laserminder:
1) Arch impacts a long trailer hitch, mirror, or bike-rack
2) Laserwash 4000 aborts the wash, instructs customer to leave which can give you a dissatisfied customer
3) Carwash is down until an attendant arrives to reset the machine
If the shear bolt is broken from the impact and the machine does not shut-down immediately, the arch can swing rapidly on the next pass, potentially impacting the vehicle.
After Laserminder:
1) Arch impacts a long trailer hitch, mirror, or bike-rack
2) Laserwash 4000 adjusts the arch position to clear the obstruction
3) Completes the wash
4) Resets and is ready for the next wash
If the shear bolt is broken from the impact, the arch is secured and locked in the impacted position to prevent any further impacts.
Benefits
- Eliminates nuisance calls
- Maximize up-time and customer satisfaction
- Simplicity – enabled by a simple software update
- No more encrypted Option Numbers
- Includes arch latch retrofit that secures the arch in the impacted position, if a shear bolt breaks
What’s Included
- CPU software chip
- Stainless steel arch latching brackets
What’s NOT Included
- All required parts are included for a typical installation, however due to the age and condition of your existing equipment, additional parts may be required. Please consult your local PDQ distributor for assistance.
Installation Information
|
People Required:
|
1-2 |
|
Mechanical skill required:
|
Basic: Use of common tools; Mounting small equipment |
|
Electrical skill required:
|
N/A |
|
Fluid skill required:
|
N/A |
|
Equipment Knowledge:
|
Intermediate: Solid understanding of control inputs/outputs and machine start-up and software update skills |
|
Tools Required:
|
Normal hand-tools and basic wiring tools |
If you need assistance in installing this item, please contact your local distributor.
