Reclaim rejected water and reduce your water bill by reducing your fresh water usage up to 50%! This reclaim system captures water rejected by your spot free generation system and injects it into the wash cycle of your choosing.
Spot Free Reclaim
Description
Features
- 300 gallon storage tank
- 25 gpm water transfer system
- Pump inlet fittings and valves
- Low level float switch for pump protection
Benefits
- Fully integrated and programmable with your Laser 4000, G5 or M5
- Gives you complete control on how and when you use the reject water
- Saves you money by reducing fresh water usage by up to 50%
What’s Included
- 300 gallon storage tank with fittings
- Transfer pumping system with mounting brackets and hardware
- Mounting hardware – 3/8″ concrete anchors
- Low level float switch and fitting
- Hose clamps
What’s NOT Included
- Pump station inlet fittings and valve – need to be ordered separately
» For a G5 – 11030047
» For a LW4K or M5 – 11030080 - Circuit breaker for main electrical panel – supplies a single phase 230V – 9.6 amp 1 ½ HP motor
- Electrical supply cable to the 1 ½ HP motor
- Low voltage control cable from the inlet valve to the machine control
- Hose to supply the tanks with spot free reject water – size dependant upon spot free generation system
- 1 ½” hose for the tank drain – length dependant upon tanks proximity to drain
- 1 ½” hose, pump supply – approximately 5′
- 1 ¼” hose, pump outlet, 200 psi – dependant upon location of transfer pump to main carwash pump
Installation Information
|
People Required:
|
1-2 |
|
Mechanical skill required:
|
Intermediate: General cutting or drilling; Use of a Dremel or angle grinder |
|
Electrical skill required:
|
Advanced: Three phase high-voltage electrical; Knowledge of local electrical codes; Motor wiring |
|
Fluid skill required:
|
Intermediate: High pressure connections; Complex assembly of fittings |
|
Equipment Knowledge:
|
Intermediate: Solid understanding of control inputs/outputs and machine start-up and software update skills |
|
Tools Required:
|
Electric drill and bit capable of drilling through concrete (if applicable) to mount 3/8” concrete anchors Drill and 0.5″ NPT tap for mounting the low level float switch in the tank Normal hand-tools and basic wiring tools, including a multi-meter Teflon pipe sealant “Fish” tape |
If you need assistance in installing this item, please contact your local distributor.
