-
Yamada Pump - NDP-15FPH - 851906 - Double Diaphragm - 13.5 GPM - 1/2in FNPT Inlet/Outlet Ports - Air Supply Pressure: 20 to 100 PSI - Air Inlet - 1/4in FNPT - Air Exhaust 3/8in FNPT - Max CFM 9 - Polypropylene Bodies - Hytrel Diaphragm
-
IDX - X10CR39C30F - Eagle X10 Series Token Xeptor - Power 24V AC/DC - Accepts a mix of 6 different coins, generic tokens and X-Mark security tokens - Unwanted coin feature - Coin sizes diameters 1.13in to 0.88in - Coin thickness 0.085 to 0.062in
-
SONNY's Alcantara Wrap-Around Conversion Kit - Red New and improved wash material from Permasoft Soft, durable, and long-lasting material Quiet; color: red Amazing cleaning performance Used on 6in unihub 4key-in Made by Favagrossa
-
SONNY's Alcantara Wrap-Around Converstion Kit - Blue New and improved wash material for Permasoft. Soft, durable, and long- lasting. Quiet; color: Blue Amazing cleaning performance. Used on 6in unihub 4key-in. Made by Favagrossa.
-
UHMW (Poly) Wheels for Belanger Wrap Around - Short Wheel without Bearing - 3-1/2in Length
-
UHMW (Poly) Wheels for Belanger Wrap Around - Long Wheel without Bearing - 4in Length
-
Pack of 20 - Wooddruff Key Half Moon - Dimension: 1/4in Width x 1in Height - Used on Hydraulic Top Mount Motors.
-
Woodruff Key Half Moon - Dimensions: 1/4in Width x 1-1/8in Height - Used on Hydraulic Bottom Mount Motors - Pack of 20
-
Wire Braid Swage Steel Fitting - 603T - Ridge Male Pipe 3/8in MPT x 3/8in I.D. Hose - for 100R1 and PC1 Hose.
-
Wire Braid Swage Steel Fitting - 403-19 -Ridge Male Pipe 1/4in MPT x 1/4in I.D. Hose - for 100R1 and PC1 Hose.
-
Wire Braid Reusable Steel Fitting - HS803R1 - Ridge Male End 1/2in MPT x 1/2in I.D. Hose - for PC1 - Power Clean Single Braid Hose.
-
Wire Braid Reusable Steel Fitting - HS603R1 - Ridge Male End 3/8in MPT x 3/8in I.D. Hose - for PC1 - Power Clean Single Braid Hose.
-
Wire Braid Reusable Steel Fitting - HS403R1 - Ridge Male End 1/4in MPT x 1/4in I.D. Hose - for PC1 - Power Clean Single Braid Hose.
-
Wire Braid Reusable Steel Fitting - 21342-6-6 - Swivel Male End 3/8in MPT x 3/8in I.D. Hose - for 100R1 -Single Braid Hose.
-
Wire Braid Reusable Steel Fitting - 21342-4-4 - Swivel Male End 1/4in MPT x 1/4in I.D. Hose - for 100R1 -Single Braid Hose.
-
Wire Braid Reusable Steel Fitting -20142-6-6 - Ridge Male End 3/8in MPT x 3/8in I.D. Hose -for 100R1 - Single Braid Hose.
-
Wire Braid Reusable Steel Fitting -20142-4-6 - Ridge Male End 1/4in MPT x 3/8in I.D. Hose -for 100R1 - Single Braid Hose.
-
Wire Braid Reusable Steel Fitting -20142-4-4 - Ridge Male End 1/4in MPT x 1/4in I.D. Hose -for 100R1 - Single Braid Hose.
-
Please Call to Order - Private label Car Wash Wipe for Dash Board and Steering Wheel - Diamond Wipes
-
Car Wash Wipe for Dash Board and Steering Wheel - Diamond Wipes
-
Wiper Bag Roll of 500 Hundred - 3 inch x 27 inch x 1.5 mil
-
Wiper Bags Plain, Case of 1000 •Protects wipers •Easy to use and store •5in x 25in x 1.5mil •50 bags per dispenser •Dispenser comes with pre-drilled holes for hanging •Color: White
-
Sonny's 5-Gallon Container Bucket with Screwtop Latching Lid Only
-
Sonny's Container Bucket of Wiper Bags - Kit Includes (1) Bucket Dispenser with Screwtop Latching Lid and (3) Rolls of 500 Hundred Bags - 3 inch x 27 inch x 1.5 mil
-
Surface Roller Steel Wheel - Dimension; 3in Diameter x 1-5/8in Width - Used on Hanna Surface Roller - (CSB1SW)
-
Wheel Steel Outrigger - RCV Wheel Dimension; 3-1/2in Diameter x 1in Width x 5/8-18 Fine Thread - Used on AVW, Hanna, Peco, PDQ and Slant Rollers
-
Wheel Steel Outrigger - RCV Wheel Dimension; 3-1/2 Diameter x 1-1/4in Width x 5/8-18 Fine Thread - Used on Flapan RCV Rollers
-
Surface Roller Steel Wheel Outer with UHMW Insert - Dimension; 2-3/4in Diameter x 1-1/2in Width x 1-1/4in Bore - Used on Econocraft and Ultimatec Surface Roller.
-
UHMW (Poly) Offset Wheel - Dimension; 3-3/8in Diameter x 2.02 Inside Diameter x 5-1/2in Length - Used on PDQ 1555 Roller.
-
UHMW (Poly) Offset Wheel - Dimension; 3-3/8in Diameter x 3-1/8in Length x 2in Bore - Used on PDQ 1555 Roller
-
UHMW (Poly) Wheel Inner Pusher - Dimension; 4in Diameter x 1-1/8in Inside Diameter - ( MacNeil # 44-063-00-PP RG440 ) 2 # needed per assembly
-
UHMW (Poly) Wheel Outer Idler - Dimension; Diameter 2-3/4in x 2-1/4in x 1-1/8in Bore ( MacNeil # 44-162-00-PP RG440 ) 2 # needed per assembly
-
UHMW (Poly) Pusher Wheel - Dimension; - 2in Diameter x 4in Length x 1in Bore. - Used on Hanna Low and Tall Proflle Roller.
-
UHMW (Poly) Pusher Wheel - Dimension; 2in Diameter x 3-3/8in x 1in Bore. - Used on Hanna 6-Wheel Low and Tall Profile Roller.
-
UHMW (Poly) Inboard Wheel - CF11 - Used on Flapan 1081 Roller