-
AMI Bearing - Insert - UC207-20 - Shaft Diameter; 1-1/4in with Set Screw Locking - Normal Duty - Wide Inner Ring - Steel Retainer
-
Threaded Rod for Tire Brush Hanger Bearing with (1)Thin Nylon Lock Nut and (2)Hex Jam Nuts (1-14 UNF x 6in) Rod
-
UHMW (Poly) Wheels for Belanger Wrap Around - Long Wheel without Bearing - 4in Length
-
Bearing Block 2 Bolt for Wipe-O Matic - Used on Torque Channel for UHMW Knob Protector Bushing
-
AMI Bearing - 2 Bolt Flange Unit - Shaft Diameter; 1in with Set Screw Locking - (E) Measurement; 3-57/64in - Lubrication Fitting Tap; 1/4-28 UNF NPT - Cast Iron Housing
-
AMI Bearing - 2 Bolt Pillow Block - Shaft Diameter; 1in with Set Screw Locking - (E) Min Measurement - 3-3/4in - Lubrication Fitting Tap; 1/4- 28 UNF - Cast Iron Housing
-
Timken - Bearing Outer Race Cup 2in - Used on Hanna Tire Brush
-
AMI Bearing - 2 Bolt Flange Unit - Shaft Diameter; 1/2in with Set Screw Locking
-
Timken - 22558 - Oil/Grease Seal 2in - Used on Hanna Tire Brush
-
UHMW Block Bearing 2 Bolt for Flat Lower Single Basket SFM807 Mitter - 1-1/4in Bore Bearing.
-
AMI Bearing - 4 Bolt Flange Unit - Shaft Diameter; 1in with Set Screw Locking - (E) Measurement; 2-3/4in - Lubrication Fitting Tap; 1/4-28 UNF - Cast Iron Housing
-
Pivoting Block Bearing for Turbo Blaster 2in x 4in Pivoting Block Bearing for Turbo Blaster 2in x 4in
-
Bearing Block Plate 2 Hole for Mitter - Used on Mitter to hold block bearing in place. Replacement plate can welded or bolted to repair mitters
-
Rod End Bearing TM-8N Male with Bronze Race and Grease Fitting - 1/2in Bore - Thread Direction: Right Hand - Thread Size: 1/2-20in
-
AMI Bearing - 2 Bolt Pillow Block - Shaft Diameter; 3/4in with Set Screw Locking - (E) Min Measurement - 3-3/8in - Lubrication Fitting Tap; 1/4- 28 UNF - Cast Iron Housing
-
AMI Bearing - 4 Bolt Flange Unit - Shaft Diameter; 3/4in with Set Screw Locking - (E) Measurement; 2-1/2in - Lubrication Fitting Tap; 1/4-28 UNF - Cast Iron Housing
-
UHMW Block Bearing 2 Bolt - 1-1/4in Bore x 5-1/4in Length x 1-1/4in Width - Used on All Moon Mitters SFM Models 202/236/901/804/805 and Flat Basket 807
-
AMI Bearing - Insert - SER205 -16 - Shaft Diameter; 1in with Set Screw Locking - Normal Duty - Wide Inner Ring - Steel Retainer
-
Rod End Bearing TF-8N Female with Bronze Race and Grease Fitting - 1/2in Bore - Thread Direction: Right Hand - Thread Size: 1/2-20in
-
UHMW (Poly) Wheels for Belanger Wrap Around - Short Wheel without Bearing - 3-1/2in Length
-
Rod End Bearing TF-7N Female with Bronze Race and Grease Fitting - 7/16in Bore - Thread Direction: Right Hand - Thread Size: 7/16-20in
-
Seal Master dust cover is used to cover and protect the exposed shaft on the turbine side. Also protects against dirt and dust build up.
-
Collar 1pc Clamp 1-1/4in ID SS Collar 1pc Clamp 1-1/4in ID SS
-
UHMW Bearing 2-Bolt - 3/4in Bore - Used on Ladder Rack with 3/4in Shoulder Bolt - Used on Flat Basket Sonny's Mitter
-
UHMW Bearing 4-Bolt - 1-1/4in Bore - Used on Moon Mitter Axle Shaft - 4in Diameter x 1-1/2in Width.
-
Rod End Bearing TF-6N Female with Bronze Race and Grease Fitting - 3/8in Bore - Thread Direction: Right Hand - Thread Size: 3/8-24in
-
UHMW Block Bearing 2 Bolt - 1in Bore x 5in Length x 1in Width - Used on All Flat Basket Mitters SFM Models 100/104/801/802
-
Soft-Drop, Bearing Plastic Cover Soft-Drop, Bearing Plastic Cover
-
UHMW Bearing 2-Bolt - 1-1/2in I.D. Bore. - Used on OMNI manifold. *This part replaces old part #10002950
-
UHMW Bearing 2-Bolt - 1in Bore - Used on Flat Basket Mitter Axle Shaft - 4in Diameter x 1-1/4in Width.
-
Rod End Bearing TF-5 Female with Bronze Race - 5/16in Bore - Thread Direction: Right Hand - Thread Size: 5/16-24in
-
UHMW Axle Spacer 1in Bore - Used on Flat Basket Mitter Axle - SFM Models - Front to Back 100/104 and Side to Side 801/802