-
Low Level Water and Fill Switch - Prevents pump cavitation by shutting it off due to low water level in tank - 24in wire lead - 1/2in x 1/2in NPT
-
Threaded Rod - 1/2-20 x 6in - 50F600SFT0Z - Zinc Plated Steel - Used on Sonny's conveyor ( Go Switch Plate ) Rod Fine Thread - Attaches to Heco shaft - Pack of 5
-
Telemecanique Proximity Sensor – Inductive Sensor XS6 M30 - Nominal sensing distance: 15MM - Voltage: 24 to 240V AC - Operating Frequency: 25/500 Hz AC/DC - 6.5 ft. Cable
-
Tape Switch - Blue - Ramped - 24VAC or VDC at 1.0amps max. - Lead Wires: 18/2 AWG Dri-Run Cabling - Heavy duty steel base plate - Tape Switch 20 ft lead Ramped Style
-
Tape Switch - Blue - 50ft lead - 24VAC or VDC at 1.0amps max. - Lead Wires: 18/2 AWG Dri-Run Cable - Heavy duty steel base plate - Dri-Run cabling - Tape Switch Narrow Style
-
Tape Switch - Blue - 20ft lead - 24VAC or VDC at 1.0amps max. - Lead Wires: 18/2 AWG Dri-Run Cable - Heavy duty steel base plate - Dri-Run cabling - Tape Switch Narrow Style
-
Tape Switch - Blue - 100ft lead - 24VAC or VDC at 1.0amps max. - Lead Wires: 18/2 AWG Dri-Run Cable - Heavy duty steel base plate - Dri-Run cabling - Tape Switch Narrow Style
-
Tape Switch - Blue - 20ft lead - 14in x 32in - 24VAC or VDC at 1.0amps max. - Lead Wires: 18/2 AWG Dri-Run Cable - Heavy duty steel base plate - Heavy duty steel base plate - Dri-Run cabling - Tape Switch
-
Tape Switch - Blue - 20ft lead - 10in x 32in - 24VAC or VDC at 1.0amps max. - Lead Wires: 18/2 AWG Dri-Run Cable - Heavy duty steel base plate - Heavy duty steel base plate - Dri-Run cabling - Tape Switch
-
Suttner ST-6 Flow Switch - 200006540 - Temperature - 176 F - Pressure - 4500 PSI - Flow Rate - 8GPM - Inlet - 3/8in MNPT - Outlet - 3/8in MNPT - Voltage - 250 - Amps - 3.0
-
Suttner ST-5 Flow Switch - 200005500 - Temperature - 176 F - Pressure - 4000 PSI - Flow Rate - 8GPM - Inlet - 3/8in FNPT - Outlet - 3/8in FNPT - Voltage -250 - Amps -3.0
-
Suttner - 200005431 - Replacement Reed Switch Only for ST-6 Model
-
Proximity Reed Switch D-B54 for MacNeil RG440 Conveyor (44-554-07-PP) Lead 18in
-
Proximity Reed Switch D-A53L for MacNeil RG440 Conveyor (90-150-01-PP) Lead 18in
-
Rotary Switch - 3 Stack, 8-position switch with stops for 2 to 8 positions / limited rotation - Rated at 10A-600VAC continuous - Shallco
-
Rotary Switch - 2 Stack, 8-position switch with stops for 2 to 8 positions / limited rotation - Rated at 10A-600VAC continuous - Shallco
-
Rotary Switch - 2 Pole, 10-position switch with stops for 2 to 12 positions / limited rotation - Rated at 10A-600VAC continuous - Shallco
-
Fresh Water Make-Up Assembly Kit - SRC201 5010 - SONNY'S
-
SB-SWFL0670 - Float Switch High Water SB-SWFL0670 - Float Switch High Water
-
Floor Switch N-320 Series Auto Alert - Yellow - 25ft lead - 5in x 32in - Molded to 3/16in steel base plate, 7/8in thick - SPST normally open 24 volts AC/VC, 100 watts -Recora
-
Floor Switch N-320TC Series Auto Alert with Traction Control - Yellow
-
Floor Switch N-320TC Series Auto Alert with Traction Control - Black
-
Floor Switch 5in 24in - Black - 50ft lead, SPST normally open switch, 24V AC/DC
-
Floor Switch 5in 24in - Black - 20ft lead - S.P.S.T. normally open switch, 24V AC/DC - Turn equipment on and off without touching cars - Recora
-
Floor Switch N240TC Series Auto Alert with Traction Control - Yellow - 5in x 24in - 25ft lead - Molded to 3/16in steel base plate, 7/8in thick - SPST normally open 24 volts AC/VC, 100 watts - Recora
-
Floor Switch N240TC Series Auto Alert with Traction Control - Black
-
Floor Switch 5in 24in - Black - 10ft lead - SPST normally open switch, 24V AC/DC
-
Floor Switch Aluminum Ramp Edging -Set of 2 with hardware - Recora
-
Pur-Clean Replacement Part - RCC85SA - High Voltage Cable for Ozone Cells - One of these will be needed for each ozone cell.
-
Pur-Clean Replacement Part - MYEL40 - 2 Wire Yellow Float with 40ft Cord - One of these will be on every reclaim tank.
-
Pur-Clean Replacement Part - MGRE40 - 3 Wire Green Float with 40ft Cord - One of these will be on every reclaim tank.