-
IDX - AT413 - Vacuum Timer 115V AC In and 24V AC Out (2.5VA/.1AMP) for coin acceptors - Dual 25AMP SCR outputs will handle up to three standard vacuum motors - Accumulates time per coin - 1-15 Coin start, maximum 256 coins to start
-
IDX - RC800 - Remote Programmer for Display - Remote control to edit IDX display's timers, message center, and BD200 muti-coin counter.
-
IDX - MX8 - 24VAC Multiplexed Control - 2 Sec on and off delay. - Monitor 8 inputs from bay location to tire cleaner or any other low pressure system. Will turn on the output device motor, pump, etc. - Will also eliminate lock up on air pumping system. Output is 24VAC or 120VAC.
-
IDX - MX48 - Multi-Foam Controller / Timer - MX-48 Foaminator series is designed to control solenoids for multiple colors of soap foam. - 8 Inputs 24V AC - Time output controls 5, 10, 15, and 20 seconds per output - Output out Voltage; 115V AC or 24V AC
-
IDX - MX3 - Timer Delay 2 Second On /.3 Second Off - This control eliminates the high pressure motor starter from picking up and dropping out as someone turns the rotary switch from one type of service to the next.
-
IDX - MX10 - 24VAC Multiplexed Control - 1 Sec on and off delay. - Monitor 8 inputs from bay location to tire cleaner or any other low pressure system. Will turn on the output device motor, pump, etc. - Will also eliminate lock up on air pumping system. Output is 24VAC or 120VAC.
-
IDX, Flat Pack AT411E-1- Vacuum Timer Non-Accumulating - Power Voltage; 115V AC or 24V AC - Used on manual vacuum, coin vacuum systems and time delay on bill changers
-
IDX - AT422 - Flat Pack Two Timer - Dual accumulating timer - Two time switches and two coin to start switches, and a control input line to switch between two time and value setting at any given instant. - Input and output voltage 120VAC or 24VAC.
-
Hamilton Replacement Part - 63-5006 - Lock Barrels w/Nut
-
Hamilton Replacement Part - 11-0100 - Coin Hopper Tall (Quarters)
-
Ginsan - GS44WE - Multi Coin Acceptor 2in Face Sensortron
-
Ginsan - 77042 - Model GS-412U - Coin Acceptor 2in Face Sensortron - Accepts coin or tokens per samples - Jam-resistant design.
-
Ginsan - 77403 - Model GS-403 - Accumulating Timer 115V AC - Vacuum Applications 115 Volts AC 60Hz
-
Ginsan - 77402 - Model GS-402 Accumulating Timer 24V AC - Bay and Fragrance Timer
-
Ginsan - 77108 - Model GS-401 Accumulating Display Timer - Coins to start 1-31, Led coin counter, last coin alert. Voltage - 24VAC
-
Ginsan - 77107 - Model GS-400 Message Center Countdown Display Timer
-
Ginsan - 77061 - Model GS-37D - Reverse Osmosis Logic Control Board
-
Ginsan - 77018 - Model GS-31B - Countdown Display 24V AC with Buzzer - The GS-31 Time Per Coin Setting must be the same as the Bay Timer.
-
Ginsan - 77013 - Model GS-31 - Countdown Display 24V AC - The GS-31 Time Per Coin Setting must be the same as the Bay Timer.
-
Ginsan - 770690 - Model GS-26 Vacuum Driver - Voltage -120VAC 60Hz
-
Last Alert Buzzer - 313830 - Model GS-20 Audible Alert Kit 24VAC - For use with Models GS255 / GS87/ GS401 - GinSan