-
Rowe Bill Changer Replacement Part - 65058012 Coin Dispenser Assembly for BC-1400 Model
-
Laurel Vending Replacement Part - 2100-D101-AD - Coin Mechanism - for Australian Dollar ( $1.00 pricing ) - Used on Mechanical Vender 2100 and 2100D
-
IDX, Flat Pack AT411E-1- Vacuum Timer Non-Accumulating - Power Voltage; 115V AC or 24V AC - Used on manual vacuum, coin vacuum systems and time delay on bill changers
-
IDX - AT413 - Vacuum Timer 115V AC In and 24V AC Out (2.5VA/.1AMP) for coin acceptors - Dual 25AMP SCR outputs will handle up to three standard vacuum motors - Accumulates time per coin - 1-15 Coin start, maximum 256 coins to start
-
Slugbuster 2 Model P-55 - P552 Qtr/Tok 2inFace Long
-
Rowe Bill Changer Replacement Part - 67005001 - Mars Bill Acceptor Kit for BC-1400 Model
-
J.E. Adams - 8712ID - Infitec ASCR54 Timer - Microcontroller based circuitry - Accumulates 1 to 15 coins - 1 Second to 17 minutes per coin - Multiple time delay selection - Dual Control; No Interfacing totalizer and timer.
-
IDX - AT422 - Flat Pack Two Timer - Dual accumulating timer - Two time switches and two coin to start switches, and a control input line to switch between two time and value setting at any given instant. - Input and output voltage 120VAC or 24VAC.
-
IDX - MA20 - Hawk Xeptor MA800 Series - Power Voltage; 24V AC/DC - 2in Wide Faceplate - Accepts 6 different coin or token types - Unwanted coin feature - Coin sizes diameters 1.13in to 0.88in - Coin size thickness 0.085in to 0.062in
-
Ginsan - 77026 - Model GS-16D - Multiplex Control with Delay - R.O. Pump Control 12 Bays
-
Dixmor - LED7 - Digitimer Display Timer - The digitimer can be mounted directly to meter door, or it is available in a remote add-on unit.
-
Ginsan - 77107 - Model GS-400 Message Center Countdown Display Timer
-
Dixmor - DX200D - Dryer Time Display 120V AC - One Pulse Start - no timed output - 4in Numbers - Counts down in seconds or minutes - 9-1/2in x 11in x 2in Stainless Steel Enclosure.
-
Dixmor - DX200STAND - for DX200 Dryer Timer - Stainless Pedestal
-
IDX - MX8 - 24VAC Multiplexed Control - 2 Sec on and off delay. - Monitor 8 inputs from bay location to tire cleaner or any other low pressure system. Will turn on the output device motor, pump, etc. - Will also eliminate lock up on air pumping system. Output is 24VAC or 120VAC.
-
Ginsan - 77013 - Model GS-31 - Countdown Display 24V AC - The GS-31 Time Per Coin Setting must be the same as the Bay Timer.
-
Ginsan - 770690 - Model GS-26 Vacuum Driver - Voltage -120VAC 60Hz
-
J.E. Adams - 8712SS4 - SSAC 120 Volt Accumulating Timer - HRV43AE - When in use, a customer can add additional token/monies and an accumulating timer will add the amount of time onto the current cycle without shutting off.
-
IDX - MA602 - Gemini Twin II Quarter Coin Xepto - Accepts U.S. quarters only - Bent coin release - MA19 2in wide snap-in face plate helps eliminate jams - Coin sense optics / anti-stringing - Power 24V AC/DC - Standard 4 wire relay output connections.
-
Ginsan - 77018 - Model GS-31B - Countdown Display 24V AC with Buzzer - The GS-31 Time Per Coin Setting must be the same as the Bay Timer.
-
Ginsan - 77403 - Model GS-403 - Accumulating Timer 115V AC - Vacuum Applications 115 Volts AC 60Hz
-
IDX - MX48 - Multi-Foam Controller / Timer - MX-48 Foaminator series is designed to control solenoids for multiple colors of soap foam. - 8 Inputs 24V AC - Time output controls 5, 10, 15, and 20 seconds per output - Output out Voltage; 115V AC or 24V AC
-
Rowe Bill Changer Replacement Part - 27034611 - Door Guard Kit Black for BC-1400 Model
-
J.E. Adams - 8712X-220 - IDX Accumulating Timer - AT411 - The IDX accumulating timer can operates on 220VAC and it has (2) heavy duty 25 Amp SCR outputs.
-
Ginsan - 77061 - Model GS-37D - Reverse Osmosis Logic Control Board
-
J.E. Adams - 8144MS - Micro Switch (White Dot) Comes with unformed trip wire. - Used for J.E. Adams 8144A Coin Acceptor
-
Last Alert Buzzer - 313830 - Model GS-20 Audible Alert Kit 24VAC - For use with Models GS255 / GS87/ GS401 - GinSan
-
J.E. Adams - 8712XEL - IDX Accumulating Timer with Last Coin Alert - AT411E-L - The IDX accumulating timer can operate either on 120VAC or 24VAC and switch out either voltage and it has (2) heavy duty 25 Amp SCR outputs.
-
Ginsan - 77108 - Model GS-401 Accumulating Display Timer - Coins to start 1-31, Led coin counter, last coin alert. Voltage - 24VAC
-
J.E. Adams - 8712X - IDX Accumulating Timer - AT411 - The IDX accumulating timer can operate either on 120VAC or 24VAC and switch out either voltage and it has (2) heavy duty 25 Amp SCR outputs.
-
Laurel Vending Replacement Part - 30-D36 - Coin Mechanism - Used On - ( 5 - Column LITTLE TREE Vender )