Name: Productivity Rinse Arch Retrofit
SKU: 11350089

Productivity Rinse Arch Retrofit

Get more throughput at your wash! You can shave nearly 30 seconds off your top package simply by adding a productivity rinse arch which can gain you an additional car per hour! Any high pressure function can be ran through the arch (e.g. rinse, polysealant, drying agent, etc).

NOTE: You must have Lasermind™ version 19.0a software or greater. This productivity kit works only with the vertical pump station. Please contact PDQ Parts Sales for pricing and availability of the Productivity Rinse Arch Retrofit for the SlimLine pump station.

SKU: 11350089 Category: LaserWash 4000

Description

What’s Included

Wash Bridge and Bay

Stainless Steel Productivity Manifold with mounting brackets
10 deflection nozzles
40 feet of 1″ hose (pump station to the festoon track)
40 feet of 3/4 hose (festoon track to the manifold)
Festoon hose mounting brackets and clamps

Pump station

Lexair valve, unloader, and MAC valve to turn on option
Fittings to retrofit the valves to the existing pump statio

Latest CPU software
Output card

What’s NOT Included

Festoon Extension kit (strongly recommended)
Additional input/output cards (this depends on your machine’s options)

Installation Information

People Required:	1-2
Mechanical skill required:	Basic: Use of common tools; Mounting small equipment
Electrical skill required:	Basic: Low-voltage electrical; Low voltage wire terminations
Fluid skill required:	Advanced: Fluid control interpretation
Equipment Knowledge:	Advanced: Full understanding of machine set-up and operation; Advanced level of troubleshooting skills
Tools Required:	3/8″ Drive Ratchet 7/16″ Socket (3/8″ drive) 9/16″ Deep Well Socket 11/16″ Open-end Wrench 7/16″ Open/Box End Wrench 1/4″ Tap Wrench 5/16″ Drill Bit 5/32″ Drill Bit 9/32″ Drill Bit 3/8″ Concrete Drill Bit Flathead Screwdriver Side Cut Pliers (2) Pipe Wrenches 10-32UNF Tap Utility Knife Teflon Tape 6′ Ladder (2)