-
Get more throughput at your wash! You can shave nearly 30 seconds off your top package simply by adding a productivity rinse arch which can gain you an additional car per hour! Any high pressure function can be ran through the arch (e.g. rinse, polysealant, drying agent, etc). NOTE: You must have Lasermind™ version 19.0a software or greater. This productivity kit works only with the vertical pump station. Please contact PDQ Parts Sales for pricing and availability of the Productivity Rinse Arch Retrofit for the SlimLine pump station.
-
The image of your bay means everything to the customer. The look of your bay immediately leaves an impression in your customers' minds about your wash and the experience they'll have at your location. Any decrease in your bay's appearance can greatly impact potential customer visits, resulting in a possible loss in profits. Refresh the look of your bay by updating the signs for your LaserWash G5!
-
The image of your bay means everything to the customer. The look of your bay immediately leaves an impression in your customers' minds about your wash and the experience they'll have at your location. Any decrease in your bay's appearance can greatly impact potential customer visits, resulting in a possible loss in profits. Refresh the look of your bay by updating the signs for your LaserWash G5!
-
The image of your bay means everything to the customer. The look of your bay immediately leaves an impression in your customers' minds about your wash and the experience they'll have at your location. Any decrease in your bay's appearance can greatly impact potential customer visits, resulting in a possible loss in profits. Refresh the look of your bay by updating the signs for your LaserWash G5!
-
Single Sided Die Cut Antenna Sign 36″ X 60″ Single Sided (NO FRAME): Custom or Branded your choice, Custom Design NO EXTRA CHARGE! All Signs are on 10MM Coroplast and are laminated for better fade resistance at NO EXTRA CHARGE!
-
Single Sided Die Cut Antenna Includes: DRY ERASE AREA for custom messages. Sign 36″ X 60″ Single Sided (NO FRAME): Custom or Branded your choice, Custom Design NO EXTRA CHARGE! All Signs are on 10MM Coroplast and are laminated for better fade resistance at NO EXTRA CHARGE!
-
SLIM 2 SECTION TRAFFIC FIXTURE WITH LED STROBES AND ULTRA BRIGHT LED CLUSTERS 18″ W x 30″ H x 4″ D. VOLTAGE; 100~240 VAC POLYURETHANE EPOXY FINISH, CHOICE OF (BLACK, SILVER, RED, YELLOW, BLUE, GREEN OR CUSTOM) MOUNTING PEDESTAL WITH 36″ GROUND CLEARANCE
-
SLIM 3 SECTION TRAFFIC FIXTURE WITH LED STROBES AND ULTRA BRIGHT LED CLUSTERS 18″ W x 30″ H x 4″ D. VOLTAGE; 100~240 VAC POLYURETHANE EPOXY FINISH, CHOICE OF (BLACK, SILVER, RED, YELLOW, BLUE, GREEN OR CUSTOM) MOUNTING PEDESTAL WITH 36″ GROUND CLEARANCE
-
Reclaim rejected water and reduce your water bill by reducing your fresh water usage up to 50%! This reclaim system captures water rejected by your spot free generation system and injects it into the wash cycle of your choosing.
-
Help protect your Access unit against "dirty" power with a surge protection and power line filter kit. This retrofit kit enhances the ability of the Access to operate reliably under electrically noisy environments. The Ethernet suppressor is designed to protect equipment against AC transients caused by lightning, electrostatic discharge and ground surges that can enter equipment from the data line. The power line filter reduces the impact of noise generated on the 110V power supply line. It specifically targets noise generated by RFI (radio frequency interference) and EMI (electromagnetic interference). Benefits
- Enhances electronic system reliability
- Provides additional protection against electrical noise and network power surges
- Adds surge suppression (lighting strikes) to the network cable
- Economical and easy to install
-
The ticket printer can be used in conjunction with a Local or Offsite Access Code Management Module (CMM) to print wash codes and reports. The ticket printer is highly recommended if using a Local Access CMM to activate/verify/replenish WALS accounts. Benefits
- Prints WALS balances when used with Card Reader (Local CMM only)
- Prints member numbers used by WALS (Local CMM only) for code redemption at the Access unit
- Prints reports from Offsite CMM without the need for access to the store register
- Prints shift reports, period reports and configuration reports
- Prints sales reports of sales through the console or pay-at-the-pump
-
Convert your Access S Series (CMS1) to the Titan controls platform (CMS2)! Four different kits are available depending on your needs - please see below for specfic upgrade options.